Effective from Date: July 6, 2022
The Services are offered and available to users who are 18 years of age or older. By using the Services, you represent and warrant that you meet the foregoing eligibility requirement. If you do not meet this requirement, you must not access or use the Services.
PLEASE BE AWARE THAT THESE TERMS INCLUDE LIMITATIONS ON THE LIABILITY OF SHAPEAMBITION AND OUR OBLIGATIONS RELATING TO THE SERVICES, CERTAIN CONDITIONS WITH RESPECT TO JURISDICTION, AND CERTAIN EXCLUSIONS OF SHAPEAMBITION’S RESPONSIBILITY.
THE SERVICES DO NOT PROVIDE MEDICAL ADVICE.
The contents of the Services, such as text, graphics, images, information obtained from Shapeambition’s licensors, and other material contained on the website, apps, newsletter, and products (“Content”) are for informational purposes only. The Content and Services are not intended to be a substitute for professional medical advice, diagnosis, or treatment. Always seek the advice of your physician or other qualified health providers with any questions you may have regarding a medical condition.
If you think you may have a medical emergency, call your doctor or 911 immediately. Shapeambition does not recommend or endorse any specific tests, physicians, products, procedures, opinions, or other information that may be mentioned in the Content or Services. Reliance on any information provided by Shapeambition, Shapeambition employees, others appearing in the Content or on the Services at the invitation of Shapeambition, or other visitors to the Services is solely at your own risk.
The Content and Services may contain Fitness and Well Being – related materials that are sexually explicit. If you find these materials offensive, you may not want to use our Content or Services.
Unless otherwise noted, all Content and Services, whether publicly posted or privately transmitted, as well as all derivative works, are property owned, controlled, licensed, or used with permission by Shapeambition, and/or its parents, subsidiaries and affiliates, or other parties that have licensed or otherwise permitted their material to be used by Shapeambition. The Services as a whole and the Contents are protected by copyright, trademark, trade dress, and other laws.
All worldwide rights, titles, and interests in and to the Services and Contents are owned by Shapeambition or used with permission. The Website, the Website’s logos, the Apps, the Apps’ logos, and all other trademarks appearing on the Content and Services are trademarks of Shapeambition or are licensed or used with permission of the owner by Shapeambition. You agree not to display or use such trademarks without Shapeambition’s prior written permission. Shapeambition disclaims any proprietary interest in trademarks, service marks, logos, slogans, domain names, and trade names other than its own.
No right, title, or interest in any downloaded materials or software is transferred to you as a result of any such downloading, sharing, or copying. Except as noted above, you may not reproduce, republish, publish, upload, post, transmit, distribute (including by email or other electronic means), publicly display, modify, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Content, the Services, or any related software without the prior written consent of Shapeambition or the owner of such material.
Nothing contained on the Content or Services grants or should be construed as granting any license or right to use, implied or otherwise, any trademarks, trade names, service marks, trade dress, or copyrighted or other proprietary material displayed on these Content and Services without the prior written consent of Shapeambition or the owner of such material. All rights not expressly granted herein by Shapeambition to you are reserved by Shapeambition and/or its licensors. Third-party trade names, product names, and logos contained in these Websites may be the trademarks or registered trademarks of their respective owners.
The information presented on or through the Content and Services is made available solely for general information purposes. We may update the Content from time to time, but the Content is not necessarily complete or up to date. Any of the material on the Services may be out of date at any given time, and We are under no obligation to update such material.
You are prohibited from violating or attempting to violate the security measures on the Services, including, without limitation:
Using a false password or one belonging to another user, or accessing data not intended for the user, or logging in to a server or account which such user is not authorized to access;
Disclosing a password or permitting a third party to use a password or failing to notify us if a password is compromised;
Attempting to probe, scan, or test the vulnerability of the system or network, or to breach security or authentication measures without proper authorization;
Attempting to interfere with service to any user, host, or network, including, without limitation, via means of overloading, “flooding,” “mail bombing,” or “crashing”;
Sending unsolicited email or commercial electronic messages, including promotions and/or advertising of products or services;
Forging any TCP/IP packet header or any part of the header information in any email or newsgroup posting; or
Hijacking all or any part of the Services or Content; deleting or changing any Services or Content; deploying pop-up messages or advertising, running or displaying the Services or Content in frames or through similar means on another website; or linking to the Services or Content, without our specific written permission.
You agree to use the Content and Services only for lawful purposes and only for your own personal, non-commercial use. You may not use the Services to transmit, post, download, distribute, copy, display publicly, store or destroy material (a) in violation of any applicable law or regulation, (b) in a manner that will infringe the copyright, patent, trademark, trade secret or other intellectual property rights of others, or violate the privacy or publicity or other personal rights of others, or (c) that is libelous, obscene, offensive, threatening, defamatory, abusive, or hateful.
We have absolute discretion to determine if any use violates these rules, and to act as We deem appropriate in the event of any violation. Violations of system or network security may result in civil or criminal liability. We will investigate occurrences that may involve such violations and may involve, cooperate with, and make disclosures to law enforcement authorities in identifying and prosecuting users who are involved in such violations.
COMMUNITY GUIDELINES FOR APPS
Please treat each other with respect.
Shapeambition’s mission is to empower people through support, hope, and knowledge. We strive to ensure all members feel welcome, safe, and respected. Following the guidelines below helps to keep the community safe for everyone.
Any manner of bullying, intimidation, or harassment is forbidden.
This is not a dating application; using the App in that way will result in expulsion from the community.
You may not post pornographic or violent content in messages, in group chats, or on your profile. This includes adding photographs, drawings, or comments, even as a joke. Depictions of nudity in non-sexual contexts, such as images of your surgery scars, are okay.
Do not ask other members to take the conversation to another messaging platform such as WhatsApp, Google Hangouts, Gmail, etc.
The promotion, advertising, or selling of any goods or services is not allowed. Unauthorized content will be removed from the App.
Do not attempt to convert other members to your religious beliefs or otherwise make them feel uncomfortable.
It should go without saying, that all illegal activity is prohibited and may be reported to the appropriate authorities.
Finally, don’t spam anyone.
We rely on you, our Apps community members, to report other members or content that violates these guidelines. Violating these Community Guidelines has consequences, which may include removal of content, suspension of posting privileges, or even expulsion from the Apps community. Please keep in mind that while something may be disagreeable to you, it does not necessarily violate our Community Guidelines.
TO REPORT ANOTHER MEMBER OR CONTENT
When reporting another member, you have two options:
Block Member: This blocks both parties from showing up in the other person’s Member list, Home activity feed, and Group discussions. In addition, 1:1 communication is not possible.
Report and Block Member: In addition to blocking the member, this creates a report, marking this member as someone who has broken the community guidelines.
You can report and/or block a member from the following places:
When you receive a match request from another member, you can accept, decline, or choose to report and block.
After you are already connected with another member, you may click on the three dots in the upper right-hand corner of your private messaging screen and choose “Report” or “Block” from the menu options.
Click on the member’s profile picture and tap “Block Member” or “Report and Block Member.”
Long-press on the offensive message and select “Block Member” or “Report and Block Member.”
Click on the member’s profile picture and tap “Block Member” or “Report and Block Member.”
Press the three dots in the upper right-hand corner of the offensive message and select ‘‘Block Member” or “Report and Block Member.”
REPRODUCTION OF CONTENT ON OTHER WEBSITES
Any Content placed on your website must be accredited to the applicable Website, with links placed to the original article on the applicable Website. You are permitted to display the following on your website, provided you do so in a way that gives full credit to us as the original publisher and does not damage our reputation or take advantage of it:
An active, follow link to the original full article on the applicable Website.
A canonical in your header code. Instructions for how to set a canonical here:
You must not establish a link from any website that is not owned by you.
Use of any and all Shapeambition logos is not permitted.
You must not establish a link in such a way as to suggest any form of association, approval, or endorsement on our part where none exists.
You may not directly or indirectly suggest any endorsement or approval by the applicable Websites of your website, products, content, or any views expressed within your website.
Our Content may only be placed on websites that:
Do not promote, facilitate, or encourage Illegal activities (and do not display actionable Content under the U.K. or U.S. law).
Do not promote, facilitate, or encourage hatred of any form (including, but not limited to, racism, terrorism, violence, and discrimination of any kind).
Do not have misleading, pornographic, or defamatory content.
Do not display any material that is in breach of any third party intellectual property rights.
Shapeambition provides the Content at no charge and you may not charge users specifically for accessing Shapeambition Content, nor attempt to sell our Content in any way.
LIABILITY OF Shapeambition AND ITS LICENSORS
BECAUSE SOME JURISDICTIONS DO NOT ALLOW EXCLUSIONS OF IMPLIED WARRANTIES, LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE BELOW LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.
The Services and the Content are provided on an “as is” basis and your use of the Services and the Content is at your own risk. When using the Services, information will be transmitted over a medium that may be beyond the control and jurisdiction of Shapeambition. Accordingly, Shapeambition assumes no liability for or relating to the delay, failure, interruption, or corruption of any data or other information transmitted in connection with the use of the Services.
Shapeambition, ITS AFFILIATES, LICENSORS, AND CONTRACTORS, TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, DISCLAIM ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT OF THIRD PARTY RIGHTS, AND FITNESS FOR PARTICULAR PURPOSE. Without limiting the foregoing, Shapeambition, its affiliates, and its licensors make no representations or warranties about the following:
The accuracy, reliability, completeness, currentness, or timeliness of the Content, software, text, graphics, links, or communications provided on or through the use of the Services.
The satisfaction of any government regulations requiring disclosure of information on prescription drug products or the approval or compliance of any software tools with regard to the Content contained on the Services.
Damages to, interruption of service, or viruses that may infect your computer or telecommunications equipment arising from your access to or use of Services and its contents.
To the fullest extent permitted by applicable law, in no event shall Shapeambition, its affiliates, licensors, contractors, or any of their respective officers, directors, employees or agents, or any third parties mentioned on the Services be liable for any damages (including, without limitation, incidental and consequential damages, personal injury/wrongful death, lost profits, or damages resulting from lost data or business interruption) even if Shapeambition has been previously advised of the possibility of such damages, whether in action under contract, negligence or any other theory, arising out of or in connection with the use, inability to use or performance of the information and Content and the Services.
For additional disclaimers and information regarding health content, please read our HEALTH INFORMATION DISCLAIMERS, which are incorporated herein by reference.
ADVERTISEMENTS, SEARCHES, AND LINKS TO OTHER WEBSITES
Shapeambition may select certain sites as priority responses to search terms you enter, and Shapeambition may agree to allow advertisers to respond to certain search terms with advertisements or sponsored content.
LOCATION AND SURVIVAL
Shapeambition is based in San Francisco, CA, in the United States of America. Shapeambition makes no claims that the Content is appropriate or may be downloaded outside of the United States.
Access to the Content may not be legal by certain persons or in certain countries. If you access the Services from outside the United States, you do so at your own risk and are responsible for compliance with the laws of your jurisdiction.
You expressly agree that exclusive jurisdiction for any dispute with Shapeambition, or in any way relating to your use of the Services and/or the Content, resides in the courts of the Delhi Capital in India and you further agree and expressly consent to the exercise of personal jurisdiction in the courts of Delhi in connection with any such dispute including any claim involving Shapeambition or its affiliates, subsidiaries, employees, contractors, officers, directors, telecommunication providers, and content providers.
All comments, feedback, suggestions, ideas, and other submissions disclosed, submitted, or offered to Shapeambition on or by the Content and/or Services or otherwise disclosed, submitted, or offered in connection with your use of the Content and/or Services (collectively, “Comments”) shall be and remain Shapeambition’s property.
Such disclosure, submission, or offer of any Comments shall constitute an assignment to Shapeambition of all worldwide rights, titles, and interests in all copyrights and other intellectual properties in the Comments. Shapeambition is and shall be under no obligation (1) to maintain any Comments in confidence; (2) to pay to user any compensation for any Comments; or (3) to respond to any user Comments.
You agree not to post on or transmit through the Services any Comments or other material that:
is unlawful, libelous, harmful, threatening, abusive, harassing, defamatory, vulgar, obscene, sexually explicit, profane, hateful, or racially, ethnically, or otherwise objectionable in any manner;
is an advertisement or promotion for any product or service that had not been approved in writing by Shapeambition;
is false, misleading, or constitutes an unfair or deceptive trade practice;
promotes the use of alcohol, tobacco, or any illegal substance;
constitutes a breach of your contractual and/or fiduciary obligations or an invasion of privacy;
infringes on any third party patent, trademark, trade name, corporate name, trade secret, copyright, publicity, or other proprietary or property rights; or
contains viruses, Trojan horses, worms, or other code, scripts, routines, files, or programs designed to alter, interrupt, impede, limit, or destroy the performance and/or functioning of any software, hardware, or other equipment.
You further agree that any Comments you provide do not contain any confidential, proprietary, or trade secret information of any third party, and will not be treated as confidential by Shapeambition. Shapeambition shall have no obligation to store, keep copies of, or return any Comments. Shapeambition further reserves the right (but does not have the obligation), in its sole discretion, to modify, delete, or remove any Comments from the Services that it deems to be in violation of the foregoing requirements.
Without limiting the generality of the foregoing, Shapeambition shall have the right to:
Remove or refuse to post any Comments for any or no reason in our sole discretion.
Disclose your identity or other information about you to any third party who claims that material posted by you violates their rights, including their intellectual property rights or their right to privacy.
Take appropriate legal action, including without limitation, referral to law enforcement, for any illegal or unauthorized use of the Services.
Without limiting the foregoing, We have the right to fully cooperate with any law enforcement authorities or court order requesting or directing Us to disclose the identity or other information of anyone posting any materials on or through the Services.
YOU WAIVE AND HOLD HARMLESS THE COMPANY AND ITS AFFILIATES, OFFICERS, DIRECTORS, EMPLOYEES, AGENTS, LICENSORS, AND SERVICE PROVIDERS FROM ANY CLAIMS RESULTING FROM ANY ACTION TAKEN BY ANY OF THE FOREGOING PARTIES DURING OR AS A RESULT OF ITS INVESTIGATIONS AND FROM ANY ACTIONS TAKEN AS A CONSEQUENCE OF INVESTIGATIONS BY EITHER SUCH PARTIES OR LAW ENFORCEMENT AUTHORITIES.
However, We cannot review all material before it is posted on the Services and cannot ensure prompt removal of objectionable material after it has been posted. Accordingly, to the fullest extent permitted by applicable law, We assume no liability for any action or inaction regarding transmissions, communications, or content provided by any user or third party. We have no liability or responsibility to anyone for the performance or nonperformance of the activities described in this section.
Shapeambition may from time to time post Content supplied by third parties and users (collectively “Third-Party Content”). In addition, if you register to receive our free newsletters and emails that promote the Services (“Newsletters”), you may receive Newsletters containing Third-Party Content or advertising that third parties sponsored.
Please read our Advertising Policy here
Any opinions, advice, statements, services, offers, or other information or content expressed or made available by third parties in the Third-Party Content are those of the respective author(s) or distributor(s) and not of Shapeambition. Shapeambition does not guarantee the accuracy, completeness, or usefulness of any Third-Party Content, nor its merchantability or fitness for any particular purpose. Additional disclaimers and limitations of liability are noted below.
NOTICES FOR REPORTING AND MAKING CLAIMS OF COPYRIGHT INFRINGEMENT
This policy is intended to comply with the requirements of the Online Copyright Infringement Liability Limitation Act and the Digital Millennium Copyright Act.
Shapeambition will investigate notices of copyright infringement and take appropriate actions under the Digital Millennium Copyright Act, Title 17, United States Code, Section 512(c)(2) (“DMCA”). If you believe that your work has been copied in a way that constitutes copyright infringement, please provide Shapeambition’s copyright agent with the written information specified below:
- An electronic or physical signature of the person authorized to act on behalf of the owner of the copyright interest.
- A description of the copyrighted work that you claim has been infringed upon.
- A description of where the material that you claim is infringing is located on the Services.
- Your address, telephone number, and email address.
- A statement by you that you have a good faith belief that the disputed use is not authorized by the copyright owner, its agent, or the law.
- A statement by you, made under penalty of perjury, that the above information in your notice is accurate and that you are the copyright owner or authorized to act on the copyright owner’s behalf.
- Pursuant to the DMCA, written notification of claimed copyright infringement must be submitted to the following designated agent for these Websites:
Indirapuram -201014, Delhi NCR
YOUR PRIVACY RIGHTS
Please send any concerns regarding our products or services by clicking here.
COMPLETE AGREEMENT AND AMENDMENTS
Thank you for your cooperation. We hope you find our Services helpful and convenient to use. Questions or comments regarding these Services, including any reports of non-functioning links, should be directed to:
Indirapuram -201014, Delhi NCR
Tel: (+91) 1204633223
Phone:n (+91) 9123485217
Email: [email protected]